Run the following command to make sure your device is properly connected to your computer. You can either manually turn off your phone or tablet and hold down the power button and the volume down button to enter your device's Bootloader Menu or you can enter the following commands into your terminal or command prompt. To do this you must first boot into your bootloader. If you want to manually flash software, you'll need to do this. Pixel phones bought from Google directly have a bootloader you can unlock. If done correctly, this will be everything you will need to do on your phone or tablet for the moment. You can also select to always allow access to that computer. Plug your device into your computer and click "OK" on the dialog box asking you to Allow USB debugging while connected to the computer.While in Developer options, turn on OEM unlocking.Make sure that the developer options are turned on and that USB debugging is on.Go back to the System menu and you should find a new option called Developer options.Tap on the Build number seven times until the dialog box says "you are now a developer.".Go to your Settings and scroll down to System and tap About Phone.Enable developer settings and USB debuggingĮnable developer settings and USB debugging.If you are following this guide and using a Windows machine, you will not need to use the ". Additionally, all the following commands are written as they would be in Terminal on a Linux or OS X platform.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |